Exploring toxicity and fate of metal-based particles in the lung : from mechanistic screening to lung deposition modelling
Author: McCarrick, Sarah
Date: 2022-06-17
Location: Lecture hall Atrium, Nobels väg 12B, Karolinska Institutet, Solna
Time: 09.30
Department: Institutet för miljömedicin / Institute of Environmental Medicine
View/ Open:
Thesis (6.148Mb)
Abstract
We are all exposed to small particles in the air that we breath and some of them will contain
metals in a dose and form that may be harmful. In addition, the field of nanotechnology holds
great promises, but an increased production of nanoparticles leads to a higher risk of exposure.
Metal-based particles are indeed also present in various traditional occupational settings
resulting in an exposure to the workers within this field. Welders are one group at risk for
exposure to metal containing particles. Despite this, many knowledge gaps remain regarding
the possible risks that particles pose on human health. With the emerging use of nanomaterial
and the move away from animal-based experiments, there is currently a need to establish
approaches of testing particles in efficient and informative ways using alternative test
strategies. This thesis aims to gain a deeper understanding of the toxicity and fate of metalbased
particles in the lung by employing experimental approaches ranging from mechanistic
screening and established in vitro assays to lung deposition modelling.
In Paper I and II, the toxicity and associated mechanisms for a wide selection of metalcontaining nanoparticles were investigated using the reporter cell based ToxTracker assay. Reporters related to oxidative stress were most frequently activated in response to the nanoparticles, whereas fewer nanoparticles activated reporters linked to DNA damage. However, the latter ones were suggested to be considered of particular concern. With the variation in activation of various reporters, this suggests that the ToxTracker can be used as a sensitive tool to gain rapid and efficient mechanistic insight into the toxicity of particles.
In Paper II, the toxicity and underlying mechanisms of welding fume particles generated by welding of stainless steel were investigated in vitro as a function of welding techniques, settings and materials. Observations revealed a high variation in toxic potential of different welding fumes, primarily depending on choice of welding electrode. Welding fumes generated with flux cored wire (FCW) were most toxic. This was strongly associated with higher metal release, in particular hexavalent chromium (Cr(VI)). In the follow-up Paper III, the released metal fraction was shown to induce similar cytotoxicity and DNA damage as the particles, further emphasizing the importance of released metals in acute toxicity induced by welding fumes. Furthermore, Paper III demonstrated the potential benefit in substituting standard Cr(VI)- generating FCW electrodes with Cr(VI)-reduced electrodes in order to create less hazardous fume particles and a safer working environment for welders. These studies furthermore highlight the beneficial collaboration between academia and industry to improve occupational environments.
In Paper IV we wanted to understand the applied in vitro doses of welding fumes in the context of human exposure. Therefore, a review of the literature was performed to obtain information on welding fume exposure at occupational settings. Next, human lung doses were estimated by simulating real-life occupational welding scenarios in the Multiple-Path Particle Dosimetry (MPPD) model. Interestingly, lung doses following both acute and more chronic exposure were found comparable to in vitro doses where we observed toxic effects in Paper III. The lung dose of the tracheobronchial region was found to exceed a cytotoxic in vitro dose already after one working shift. Moreover, this study demonstrates the significant contribution of dosimetry modelling in order to understand the relation between in vitro doses and human exposure, and its potential future importance for risk assessment and study design.
In conclusion, the results of the studies within the framework of this thesis demonstrate a variation in toxic potency and mode of action for metal-based particles. Metal release is shown to be an important factor for metal-particle induced toxicity, with results showing metal release, rather than metal content, to be largely responsible for acute toxicity induced by welding fumes. This thesis especially highlights the use of in vitro models for the hazard assessment of particles, identifying both the ToxTracker and lung deposition modelling as important tools for improving the efficiency and regulatory weight of in vitro approaches.
In Paper I and II, the toxicity and associated mechanisms for a wide selection of metalcontaining nanoparticles were investigated using the reporter cell based ToxTracker assay. Reporters related to oxidative stress were most frequently activated in response to the nanoparticles, whereas fewer nanoparticles activated reporters linked to DNA damage. However, the latter ones were suggested to be considered of particular concern. With the variation in activation of various reporters, this suggests that the ToxTracker can be used as a sensitive tool to gain rapid and efficient mechanistic insight into the toxicity of particles.
In Paper II, the toxicity and underlying mechanisms of welding fume particles generated by welding of stainless steel were investigated in vitro as a function of welding techniques, settings and materials. Observations revealed a high variation in toxic potential of different welding fumes, primarily depending on choice of welding electrode. Welding fumes generated with flux cored wire (FCW) were most toxic. This was strongly associated with higher metal release, in particular hexavalent chromium (Cr(VI)). In the follow-up Paper III, the released metal fraction was shown to induce similar cytotoxicity and DNA damage as the particles, further emphasizing the importance of released metals in acute toxicity induced by welding fumes. Furthermore, Paper III demonstrated the potential benefit in substituting standard Cr(VI)- generating FCW electrodes with Cr(VI)-reduced electrodes in order to create less hazardous fume particles and a safer working environment for welders. These studies furthermore highlight the beneficial collaboration between academia and industry to improve occupational environments.
In Paper IV we wanted to understand the applied in vitro doses of welding fumes in the context of human exposure. Therefore, a review of the literature was performed to obtain information on welding fume exposure at occupational settings. Next, human lung doses were estimated by simulating real-life occupational welding scenarios in the Multiple-Path Particle Dosimetry (MPPD) model. Interestingly, lung doses following both acute and more chronic exposure were found comparable to in vitro doses where we observed toxic effects in Paper III. The lung dose of the tracheobronchial region was found to exceed a cytotoxic in vitro dose already after one working shift. Moreover, this study demonstrates the significant contribution of dosimetry modelling in order to understand the relation between in vitro doses and human exposure, and its potential future importance for risk assessment and study design.
In conclusion, the results of the studies within the framework of this thesis demonstrate a variation in toxic potency and mode of action for metal-based particles. Metal release is shown to be an important factor for metal-particle induced toxicity, with results showing metal release, rather than metal content, to be largely responsible for acute toxicity induced by welding fumes. This thesis especially highlights the use of in vitro models for the hazard assessment of particles, identifying both the ToxTracker and lung deposition modelling as important tools for improving the efficiency and regulatory weight of in vitro approaches.
List of papers:
I. McCarrick S, Cappellini F, Kessler A, Moelijker N, Derr R, Hedberg J, Wold S, Blomberg E, Odnevall Wallinder I, Hendriks G, Karlsson HL. ToxTracker Reporter Cell Lines as a Tool for Mechanism-Based (geno)Toxicity Screening of Nanoparticles-Metals, Oxides and Quantum Dots. Nanomaterials. 2020 Jan;10(1):110.
Fulltext (DOI)
Pubmed
View record in Web of Science®
II. McCarrick S, Wei Z, Moelijker N, Derr R, Persson KA, Hendriks G, Odnevall Wallinder I, Hedberg Y, Karlsson HL. High variability in toxicity of welding fume nanoparticles from stainless steel in lung cells and reporter cell lines: the role of particle reactivity and solubility. Nanotoxicology. 2019 Dec;13(10):1293-1309.
Fulltext (DOI)
Pubmed
View record in Web of Science®
III. McCarrick S, Romanovski V, Wei Z, Westin EM, Persson KA, Trydell K, Wagner R, Odnevall I, Hedberg YS, Karlsson HL. Genotoxicity and inflammatory potential of stainless steel welding fume particles: an in vitro study on standard vs Cr(VI)-reduced flux-cored wires and the role of released metals. Archives of Toxicology. 2021 Sep;95(9):2961-2975.
Fulltext (DOI)
Pubmed
View record in Web of Science®
IV. McCarrick S, Karlsson HL, Carlander U. Modelled lung deposition and retention of welding fume particles in occupational scenarios: a comparison to doses used in vitro. Archives of Toxicology. 2022 Apr;96(4):969-985.
Fulltext (DOI)
Pubmed
View record in Web of Science®
I. McCarrick S, Cappellini F, Kessler A, Moelijker N, Derr R, Hedberg J, Wold S, Blomberg E, Odnevall Wallinder I, Hendriks G, Karlsson HL. ToxTracker Reporter Cell Lines as a Tool for Mechanism-Based (geno)Toxicity Screening of Nanoparticles-Metals, Oxides and Quantum Dots. Nanomaterials. 2020 Jan;10(1):110.
Fulltext (DOI)
Pubmed
View record in Web of Science®
II. McCarrick S, Wei Z, Moelijker N, Derr R, Persson KA, Hendriks G, Odnevall Wallinder I, Hedberg Y, Karlsson HL. High variability in toxicity of welding fume nanoparticles from stainless steel in lung cells and reporter cell lines: the role of particle reactivity and solubility. Nanotoxicology. 2019 Dec;13(10):1293-1309.
Fulltext (DOI)
Pubmed
View record in Web of Science®
III. McCarrick S, Romanovski V, Wei Z, Westin EM, Persson KA, Trydell K, Wagner R, Odnevall I, Hedberg YS, Karlsson HL. Genotoxicity and inflammatory potential of stainless steel welding fume particles: an in vitro study on standard vs Cr(VI)-reduced flux-cored wires and the role of released metals. Archives of Toxicology. 2021 Sep;95(9):2961-2975.
Fulltext (DOI)
Pubmed
View record in Web of Science®
IV. McCarrick S, Karlsson HL, Carlander U. Modelled lung deposition and retention of welding fume particles in occupational scenarios: a comparison to doses used in vitro. Archives of Toxicology. 2022 Apr;96(4):969-985.
Fulltext (DOI)
Pubmed
View record in Web of Science®
Institution: Karolinska Institutet
Supervisor: Karlsson, Hanna
Co-supervisor: Carlander, Ulrika; Odnevall, Inger; Gerde, Per
Issue date: 2022-05-24
Rights:
Publication year: 2022
ISBN: 978-91-8016-662-1
Statistics
Total Visits
Views | |
---|---|
Exploring ... | 654 |
Total Visits Per Month
October 2023 | November 2023 | December 2023 | January 2024 | February 2024 | March 2024 | April 2024 | |
---|---|---|---|---|---|---|---|
Exploring ... | 25 | 48 | 23 | 30 | 23 | 31 | 20 |
File Visits
Views | |
---|---|
Thesis_Sarah_McCarrick.pdf | 264 |
Top country views
Views | |
---|---|
Sweden | 252 |
Ireland | 109 |
United States | 80 |
United Kingdom | 42 |
China | 17 |
Germany | 15 |
South Korea | 12 |
Norway | 7 |
Finland | 6 |
Netherlands | 6 |
Top cities views
Views | |
---|---|
Karlstad | 161 |
Dublin | 84 |
Stockholm | 14 |
Bromma | 6 |
San Mateo | 6 |
Umeå | 5 |
Andover | 4 |
Chongqing | 4 |
Moscow | 4 |
Uppsala | 4 |